« Lunch - John Dunn, Consultant, Ambertec, P.E., P.C. | Main | Our May 4 Meeting - Dick LaRosa »

May 07, 2011

Comments

Ed Mengel

A card with RFID will have a symbol on the back of the card that looks like a radiating signal. A dot is shown with small arcs that enlarge as they get further away from the dot. The credit card companies are supposed to give you a card without the RFID if you request one.

One of the TV news shows demonstrated how a suitcase device could read RFID cards. I know this is not one of the best references, but the demonstration was convincing.

Simon Pereira

Same reason I wear a tin foil hat... ;^)

Seriously though, this is one of those cases where the party with the most to gain or lose has the most control over the deployment of the tech... And I don't mean the end users; I mean the credit card companies. It is up to them to ensure that the RFID info can not be misused.

I think I can relax and let them handle the security issues. If I am ever robbed in this way, I will simply ask them to void it off my bill just as I would any suspicious purchase that I believed to be fraud.

So the real question becomes why do the CC companies want credit cards with RFID chips? Is it just so you can have greater ease of use (swiping a card is already pretty easy) or is it so they can start tracking you and your card even if you don't pull out your wallet?

Cor van de Water

Simply disable the RFID in the card.
Most cards are opaque, but you can still see a small (1/8 square inch) where the processor is embedded.
Stab it with a knife to kill the processor...
Note that this may also kill any other electronic function.
For example my ABN-AMRO (now Fortis bank) card has given me
*great* security by allowing me to use my ATM PIN and a
challenge number to authenticate me for online banking by using
a small calculator box where you insert the card and which
communicates with the processor to calculate the response to
the ATM PIN and challenge number, so there is a guaranteed
proof that the person logging in is the one with the ATM card
and PIN. I definitely do not want to lose that, it has allowed
me to do my banking safely for more than 10 years already.
NOTE that it is even easier to disable just the RFID on the
Amex Blue or Cash cards, because they are transparent.
I have no camera handy otherwise I could shoot a picture of
how I treated the RFID antenna (7 concentric rectangles) in the
same way as a PCB that needs patching: simply cut into the card
from one side until you have interrupted one or two of the coils,
so they no longer can receive or transmit. Done. The card is not
damaged in any major way, it just looks as if there is a deep
scratch from the back surface, not even visible from the front.
I made sure to cut in an area that did not have numbers (or
magnet strip) on front or back. Good luck killing your cards.

Cor van de Water

BTW, I just looked through my stack of cards and the only other
card that has a processor onboard is from JPMorgan, it features
the word "BLINK" and a sign of wireless activity consisting of
4 concentric circle segments.
I noticed the same sign on the Amex card that I already neutered.
It may well be that you need to signup for this service, but I am
not taking too many chances right now.
I thought that Amex was the first to offer RFID cards, since I have seen their antenna embedded in my card for many years, but
this 2005 article claims JPMorgan's Chase to be the first:
http://www.rfidjournal.com/article/articleview/1615/1/1/

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been saved. Comments are moderated and will not appear until approved by the author. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Comments are moderated, and will not appear until the author has approved them.

Your Information

(Name and email address are required. Email address will not be displayed with the comment.)

Editor

  Learn about our  

 free engineering 

consulting referral 

      service at:

 

  IEEE Consultant's 

      Network of 

     Long Island

 

We have over forty 

electrical, electronic, 

mechanical and 

software engineers 

with expertise in more 

than sixty-five categories 

of technology and business. 

All are members of the 

IEEE and adhere to the 

IEEE professional codes 

of ethics. 

No fee is charged for the

referral service. 

Each member is an 

independent consultant 

and negotiates his/her 

own consulting agreement.

 

Editor: Jerry Brown

Contributors:

John Dunn

Marty Kanner

Murray Kleiner

Dick LaRosa

David Pinkowitz

Carl Schwab

Gerry Bodner

Larry Rachman

 

Unless otherwise noted, 

reprinting or republication 

of anarticle on this blog is 

authorized by crediting the 

author and prominently 

displaying the following 

sentence at the beginning 

or end of the article,

including the hyperlink to

IEEE Consultant's Network 

of Long Island


"This report is republished 

with permission of IEEE 

Consultant's Network of 

Long Island"

 

Pages

Blog powered by Typepad

Enter your email address:

Delivered by FeedBurner